手机二维码
深圳市福田区彩田路星河世纪A栋612-615   0755-8325 2996   LJL@newunitedart.com
首页    |   关于我们     |   设计服务    |   施工服务     |   实景案例    |   生产加工   |     联系我们   Copyright © 2017 深圳市新艺联bwin最新官网工程有限公司 All rights reserved
微信二维码
生产加工 PRODUCTIONS
>
预制构件
GRP/GRC玻t离纤维增强塑料/水泥 厂内预制,现场安装
施工便捷,任意造型
强度高,耐久性特强
表面光滑,上色鲜艳
可制作半透明效果
GRP/GRC glass fiber reinforced plastics
actory Casting fast Installation Easily installed,can be molded into any shape
Strong and very durable
Any texture can be produced,available in paint grade or with integral color
Translucent effects can be produced
泥稿制作:对于造型复杂的雕塑内部需根据造型进行龙骨制作,
在龙骨表面固定网布后,再进行大体形态雕刻。
大型把握好之后再进行细部雕刻。

Second:When produce the clay model for the complex
shape sculpture, we will have detail carving.
泡沫稿制作:按照设计尺寸选材体型小的用整材雕刻,
体型大的局部雕刻后拼装。

First: Foam model production in accordance with the design size to
choose material.The small size use the whole material
to carve, while the big size combine the carved parts.
玻璃钢成品合模:螺栓固定或钢结构焊接,焊接 处需防锈处理。 Combine parts mold Bolt fixing or steel structure
welding,welding place should take anti一rust measure.
上色: 1.表面清理2.基层密封漆3.底漆 4.由彩绘师按图纸调配颜色,
现场喷涂局部细节人工彩绘 .面层保护漆
Color the surface: 1.Surface cleaning 2 .Base Seal Paint 3 .Base paint 4. The painted artist deploy color according to the drawings, on-site
spraying,local details of artificial painting,
surface protection paint.
   
石膏或硅胶开模 开模分两种: 1、泥稿擦拭干净,用毛刷涂上薄一层液体石蜡,
2、取适量模具硅胶或石膏粉
3、均匀地涂在泥稿表面。
4、完全固化根据温度高低大约在24小时左右,然后直接把做好的模具从泥稿上脱下即可。

Open gypsum or silicone mold
Production Method:
1.Wipe the clay mold clean,brush a thin layer of liquid paraffin,
2.Take the right amount of mold silica gel or gypsum powder
3 .Coate on the surface of the clay mold evenly. 4.Fully solidified depends on the temperature about 24 hours and then make the mold from the clay mold off directly.